Technical Guide
Wire EDM Corner Radius Guide
Review Wire EDM Corner Radius Guide in relation to material behavior, tolerance, surface finish and inspection planning before sending drawings.
EDM Feasibility Notes
We review EDM feasibility for the selected material using the drawing geometry, conductive material condition, tolerance, surface finish, quantity and inspection requirements.
Technical Explanation
This guide helps prepare EDM drawings by reviewing material conductivity, process access, tolerance, surface finish and inspection requirements.
Project question: What inside corner radius can wire EDM cut?
Process Capability Facts
We review EDM process fit from material conductivity, feature access, thickness, geometry, tolerance, surface finish and inspection requirements.
Tolerance, Surface Finish and Geometry Review
Typical tolerance and surface finish depend on material, thickness, feature geometry, flushing, finishing passes and inspection method. Final values must be confirmed from the drawing.
Recast Layer / Surface Integrity Notes
Surface integrity, recast layer, micro-crack risk, post-processing and inspection depend on the material, EDM process, geometry and machine setup.
Technical Review Checklist
| Concept | Wire EDM Corner Radius Guide |
|---|---|
| How we use this guide | We use these points to discuss EDM process fit before confirming the production approach. |
| Drawing review | We confirm material conductivity, feature access, geometry, thickness, tolerance, surface finish and inspection method from your drawing. |
| Project details | Please include drawings, material grade, critical dimensions and any required inspection or surface-integrity controls. |
Inspection and Capability Reference
Inspection planning may include dimensional measurement, optical measurement, surface roughness checks and report requirements according to the drawing.
Technical Note
Use this technical guide to prepare your drawing and key requirements, then contact our team when you need project-specific EDM review.
Need help reviewing an EDM drawing?
Send a drawing question, material details and key requirements for technical review.
- Drawing or part sketch
- Material grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
What is wire EDM commonly used for?
Wire EDM is commonly reviewed for through profiles, slots, punches, inserts and conductive precision parts.
Why does wire access matter?
The wire normally needs a through path or start hole, so cutting access must be confirmed from the drawing.
What affects wire EDM tolerance?
Material, thickness, wire diameter, flushing, pass strategy, feature geometry and inspection method affect tolerance.
Can wire EDM cut blind cavities?
Blind cavities are normally reviewed for sinker EDM because wire EDM requires a through-wire cutting path.
What should be sent for wire EDM review?
Send drawings, material grade, thickness, tolerance, surface finish, quantity and inspection requirements.