Material Guide
Titanium Grade 2 EDM Machining
We review Titanium Grade 2 for EDM machining based on your drawing and project requirements.
EDM Parameter Summary
| Parameter | Reference Range / Value |
|---|---|
| Material | Titanium Grade 2 |
| Typical Tolerance (Wire EDM) | ±0.005 – 0.025 mm |
| Typical Surface Finish | Ra 0.1 – 3.2 μm |
| Recast Layer Risk | High |
| Post-Process Recommendation | Polishing, lapping, chemical cleaning, passivation, stress relief or recast-layer removal for critical surfaces |
EDM Feasibility Notes
We review EDM feasibility for Titanium Grade 2 using the drawing geometry, conductive material condition, tolerance, surface finish, quantity and inspection requirements.
Material Behavior in EDM
We review Titanium Grade 2 according to material grade, conductivity, heat treatment condition, feature geometry, tolerance, surface finish and inspection requirements before confirming the EDM route.
Process Capability Facts
The selected EDM process suitability depends on drawing access, feature geometry, material conductivity, electrode or wire path, flushing conditions and the required inspection method.
Tolerance and Surface Finish Expectations
Typical tolerance and surface finish depend on material, thickness, feature geometry, flushing, finishing passes, machine setup and inspection method. Final values must be confirmed from the drawing.
Thickness and Geometry Review Notes
Review part thickness, feature depth, inside radii, cutting access and geometry stability before confirming the EDM route for Titanium Grade 2.
Surface Integrity and Recast Layer Review
EDM can create a recast or white layer and other thermal surface effects. Critical surfaces should identify post-processing and inspection requirements on the drawing.
Inspection and Drawing Requirements
Please include material grade, drawing revision, critical dimensions, datums, tolerance, surface finish, quantity and any inspection report requirements. We confirm the inspection method according to the drawing before quotation. Please also include destination country, end-use information and any compliance requirements when additional review may be needed.
Sample Before Batch Production
Sample approval is recommended before batch production when tolerance, surface integrity, material response, geometry or documentation requirements must be confirmed.
Drawing Requirement Checklist
Send us your drawing, material grade, quantity, destination country and application notes so our team can confirm machining feasibility.
- drawing, material spec, destination, end use, certificate requirement, quantity, tolerance, surface integrity requirement
- Compliance/risk acknowledgement must be shown before submission.
- Drawing is strongly recommended for any quotation; required for tight tolerance, micro feature, cavity, export/compliance or batch production review.
Additional Project Review
Some materials, applications, or destination countries may require additional review before quotation. Send us your drawing, material grade, quantity, destination country, and application notes so our team can confirm machining feasibility.
Submit Drawing for Review
Some materials, applications, or destination countries may require additional review before quotation. Send us your drawing and project details so our team can confirm machining feasibility.
Frequently Asked Questions
Can Titanium Grade 2 be machined with EDM?
EDM may be reviewed when the material is electrically conductive and the drawing defines the required geometry, tolerance, finish and inspection method.
Which EDM processes are commonly reviewed for Titanium Grade 2?
We review wire EDM, sinker EDM, small hole EDM drilling or micro EDM based on feature access, thickness, cavity shape, hole size and surface requirements.
What material details should be included in the review?
Please provide material grade, heat treatment condition, stock size, required certificates if applicable and any critical surface or edge requirements.
Does heat treatment affect EDM review for Titanium Grade 2?
Yes. Heat treatment and final hardness can affect cutting strategy, distortion risk, finishing passes and inspection planning.
What inspection information should be provided?
Include critical dimensions, tolerance callouts, surface roughness targets and any report or material document requirements shown on the drawing.
What extra details help project review?
Destination, end use, material documentation, inspection needs and any restricted handling requirements help us review the project before quotation.